Fuel rate and energy input: Assume this vehicle cruises on level highway at 70 miles/hour and crankshaft speed of 3500 RPM. The vehicle is assumed to have a fuel economy of 35 miles per gallon, where gasoline has a heating value of 114,000 Btu/gallon.
Determine:
a) the fuel consumption rate (gallons/hour),
b) combustion energy per thermodynamic cycle (Btu),
c) specific heat input per thermodynamic cycle (Btu/lbm).

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86