Engineering, 13.02.2020 20:45 katelynamber10
A milling operation was used to remove a portion of a solid bar of square cross section. Forces of magnitude P = 19 kN are applied at the centers of the ends of the bar. Knowing that a = 28 mm and sigma_all = 130 MPa, determine the smallest allowable depth d of the milled portion of the bar.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
A milling operation was used to remove a portion of a solid bar of square cross section. Forces of m...
Advanced Placement (AP), 03.03.2021 21:10
Mathematics, 03.03.2021 21:10
Social Studies, 03.03.2021 21:10
English, 03.03.2021 21:10
Mathematics, 03.03.2021 21:10
Mathematics, 03.03.2021 21:10
English, 03.03.2021 21:10
English, 03.03.2021 21:10
Mathematics, 03.03.2021 21:10
Mathematics, 03.03.2021 21:10
Health, 03.03.2021 21:10
Mathematics, 03.03.2021 21:10