subject
Engineering, 13.02.2020 23:30 jay4881

A soil sample has a moist unit weight of 117 pcf, a moisture content of 17 percent, and soil particles with a specific gravity of 2.70. Answer the following questions about this soil.
(A) Dry unit weight.
(B) Porosity.
(C) Degree of saturation.
(D) Weight of water, in pounds per cubic foot, to be added to reach full saturation.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
You know the right answer?
A soil sample has a moist unit weight of 117 pcf, a moisture content of 17 percent, and soil particl...
Questions
Questions on the website: 13722367