subject
Engineering, 14.02.2020 21:42 adelarangelmartinez

Magnesium hydroxide is slightly soluble in water (Ksp = 1.8 x 10-11). NaOH is added to a solution of Mg(NO3)2 until a precipitate forms and persists. The solution is then heated and the precipitate dissolves. What can you conclude from these observations?

A. dissolution of Mg(NO3)2 is endothermic
B. dissolution of Mg(NO3)2 is exothermic
C. dissolution of Mg(OH)2 is endothermic
D. dissolution of Mg(OH)2 is exothermic

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
Magnesium hydroxide is slightly soluble in water (Ksp = 1.8 x 10-11). NaOH is added to a solution of...
Questions
question
Mathematics, 17.09.2021 04:20
question
Mathematics, 17.09.2021 04:20
question
Chemistry, 17.09.2021 04:20
question
Mathematics, 17.09.2021 04:20
Questions on the website: 13722363