Engineering, 15.02.2020 01:56 caleb19moody
As part of an insurance company’s training program, participants learn how to conduct an analysis of clients’ insurability. The goal is to have participants achieve a time in the range of 30 to 47 minutes. Test results for three participants were: Armand, a mean of 37.0 minutes and a standard deviation of 3.0 minutes; Jerry, a mean of 38.0 minutes and a standard deviation of 2.0 minutes; and Melissa, a mean of 38.5 minutes and a standard deviation of 2.9 minutes.
a. Which of the participants would you judge to be capable? (Do not round intermediate calculations. Round your answers to 2 decimal places.)
Participants :
Armand: Cpk Cp Capable ? (Click to select)NoYes
Jerry: Cpk Capable ? (Click to select)YesNo
Melissa Cp (Click to select)NoYes
b. Can the value of the Cpk exceed the value of Cp for a given participant?
yes or no
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
As part of an insurance company’s training program, participants learn how to conduct an analysis of...
Questions
Physics, 25.01.2020 06:31
