subject
Engineering, 17.02.2020 17:10 reggienald3095

Water flows at a rate of 7 m^3/s in a circular sewer 1.6 meters in diameter. The slope of the sewer is 0.01.
(a) Calculate the depth of flow and velocity in the sewer, assuming normal flow.
(b) Determine the diameter of pipe required for the discharge to be carried at 3/4 full.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Water flows at a rate of 7 m^3/s in a circular sewer 1.6 meters in diameter. The slope of the sewer...
Questions
question
Mathematics, 23.07.2019 23:00
question
Mathematics, 23.07.2019 23:00
question
Chemistry, 23.07.2019 23:00
Questions on the website: 13722361