Engineering, 17.02.2020 21:20 brazilmade1
You are working as a flight-test engineer at the NASA Dryden Research Center. During the low-speed phase of the test program for the X-37, you know that the plane is flying at an altitude of 8 km. The pressure at station 1 is 1550 N/m^2 , gage; the pressure at station 2 is -3875 N/m^2 , gage.
a. If gage 1 is known to be at the stagnation point, what is the velocity of the airplane?
b. What is its Mach number?
c. What is the free-stream dynamic pressure for this test condition?
d. What is the velocity of the air at the edge of the boundary layer at the second point relative to the airplane? What is the velocity relative to the ground? What is the Cp for this gage?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
You know the right answer?
You are working as a flight-test engineer at the NASA Dryden Research Center. During the low-speed p...
Questions
