Engineering, 17.02.2020 21:32 missheyward30
The inner surface of a hollow cylinder is subjected to tangential and axial stresses of 40,000 and 24,000 psi, respectively. Determine the maximum shear stress at the inner surface, if the cylinder is pressurized to 10,000 p
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
The inner surface of a hollow cylinder is subjected to tangential and axial stresses of 40,000 and 2...
Questions
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Social Studies, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Social Studies, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
English, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
