Engineering, 17.02.2020 22:23 ijohnh14

Define the following terms in your own words: (a) elastic strain, (b) plastic strain, (c) creep strain, (d) tensile viscosity, (e) recovery, and (f) relaxation.

Answers: 3

Show answers

Answers

Answer from: kps26pd2mea

Detailed Answer is given below,

Explanation:

(a) Elastic strain

Elastic deformation is defined as the limit for the deformation values up to which the object will bounce and return to the original shape when the load is removed.

When the object is subjected to an external load, it deforms. If the load exceeds the load corresponding to the elastic limit of the object, then, after removing the load, the object cannot return to its original geometric specification.

(b) Plastic strain

Plastic Strain is a deformation that cannot be recovered after eliminating the deforming force. In other words, if the applied tension is greater than the elastic limit of the material, there will be a permanent deformation.

The deformation of the material at a higher temperature is much more than at the normal temperature known as creep.

Subsequently, the deformation produced in heated material is called creep deformation. Creep deformation is a function of temperature.

(d) Tensile viscosity

Viscosity is a main parameter when measuring flux fluids, such as liquids, semi-solids, gases and even solids. Brookfield deals with liquids and semi-solids. Viscosity measurements are made together with the quality and efficiency of the product. Any person involved in the characterization of the flow, in research or development, quality control or transfer of fluids, at one time or another is involved with some kind of viscosity measurement.

(e) Recovery

Recovery is a process whereby deformed grains can reduce their stored energy by eliminating or reorganizing defects in their crystalline structure. These defects, mainly dislocations, are introduced by plastic deformation of the material and act to increase the elastic limit of a material.

(f) Relaxation

Stress relaxation occurs in polymers when they remain tense for long periods of time.

These alloys have very good resistance to stress relaxation and, therefore, are used as spring materials.

Stress relaxation is a gradual reduction of stress over time in constant tension.

Answer from: Quest

Answer: harry styles

Answer from: Quest

answer:

explain:

we don't have any choices.

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

You know the right answer?

Define the following terms in your own words: (a) elastic strain, (b) plastic strain, (c) creep stra...

Questions