Engineering, 18.02.2020 00:31 izzyisawesome5232

Using Python, have your program do the following, using loops (no recursion)

1. Have the user repeatedly enter integers until they enter a negative number. At that point stop inputting and proceed to the output described in step two. Note: The negative number that terminates the input is not included in any of these results.
2. When the input is done, display the following if there was at least one valid (non -negative) number entered:

(a) The sum of the numbers entered in that loop
(b) How many numbers were entered
(c) The average of those numbers to two places (avoid integer division.)
(d) The lowest number input
(e) The highest number input

If there were no (valid) numbers entered, make sure your code displays the message "no valid numbers entered" (and avoids dividing by 0) instead of displaying a - e below.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Using Python, have your program do the following, using loops (no recursion)

1. Have the...

Questions