Engineering, 18.02.2020 18:02 Nathaliasmiles

The wastewater flow velocity in the channel immediately upstream of the screen will vary from 0.4 to 0.9 m s−1. What is the design headloss for the screens at the two extremes of flow? Assume that the friction coefficient is 0.84. A) What are the design head losses for the screens at the two extremes of flow (0.4 and 0.9 m/s) if the screen is mechanically-cleaned? B) What are the design head losses for the screens at the two extremes of flow (0.4 and 0.9 m/s) if the screen is manually-cleaned?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

You know the right answer?

The wastewater flow velocity in the channel immediately upstream of the screen will vary from 0.4 to...

Questions