Engineering, 18.02.2020 22:40 Dajabrooks492
Link AB, of width b = 2 in. and thickness t = 14 in., is used to support the end of a horizontal beam. The average normal stress in the link is -22 ksi and the average shearing stress in each of the two pins is 12 ksi.1) Determine diameter of pins.2) Average bearing stress in the link.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Link AB, of width b = 2 in. and thickness t = 14 in., is used to support the end of a horizontal bea...
Questions
Mathematics, 20.04.2020 23:57
English, 20.04.2020 23:57
Mathematics, 20.04.2020 23:57
History, 20.04.2020 23:57
Chemistry, 20.04.2020 23:57
History, 20.04.2020 23:57
English, 20.04.2020 23:57
