Engineering, 19.02.2020 17:41 Hfruit
(20pts) A thermocouple junction, which may be approximated as sphere, is to be used for temperature measurement in a gas stream. The convection coefficient between the junction surface and the gas is h = 400 W/m2·K and the junction thermophysical properties are k = 20 W/m·K, c = 400 J/kg·K and rho = 8500 kg/m3. Determine the junction diameter needed for the thermocouple to have a time constant of 2 s. If the junction is at 25 °C and is placed in a gas stream that is at 200 °C, estimate the temperature of the junction after 10 minutes.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
(20pts) A thermocouple junction, which may be approximated as sphere, is to be used for temperature...
Questions
Mathematics, 13.12.2020 08:00
Social Studies, 13.12.2020 08:00
Mathematics, 13.12.2020 08:00
Mathematics, 13.12.2020 08:00
Health, 13.12.2020 08:00
Biology, 13.12.2020 08:00
Mathematics, 13.12.2020 08:00
Physics, 13.12.2020 08:00
