Engineering, 19.02.2020 23:32 qveensentha59

A 1000 - W iron is left on the iron board with its base exposed to ambient air at 20 degree C. The base plate of the iron has a thickness of L = 0.5 cm, base area of A = 150 cm2, and thermal conductivity of k = 18 W/m degree C. The inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside. The outer surface of the base plate whose emissivity is epsilon = 0.7, loses heat by convection to ambient air at T infinity = 22 degree C with an average heat transfer coefficient of h = 30 W/m2 degree C as well as by radiation to the surrounding surfaces at an average temperature of Tsurr = 290 K. Disregarding any heat loss through the upper part of the iron. (a) express the differential equation and the boundary conditions for steady one - dimensional heat conduction through the plate, (b) obtain a relation for the temperature of the outer surface of the plate by solving the differential equation, and (c) evaluate the outer surface temperature.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.

Answers: 1

Answer

You know the right answer?

A 1000 - W iron is left on the iron board with its base exposed to ambient air at 20 degree C. The b...

Questions