Engineering, 20.02.2020 04:08 jjimenez0276
Design a 7.5-V zener regulator circuit using a 7.5-V zener specified at 10mA. The zener has an incremental resistance of rZ = 30 Ω and a knee current of 0.5 mA. The regulator operates from a 10-V supply and delivers a nominal current of 5 mA to the load. What is the value of R you have chosen? What is the regulator output voltage when the supply is 10% high? Is 10% low? What is the output voltage when both the supply is 10% high and the load is removed? What is the largest load current that can be delivered while the zener operates at a current no lower than the knee current while the supply is 10% low? What is the load voltage in this case?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Design a 7.5-V zener regulator circuit using a 7.5-V zener specified at 10mA. The zener has an incre...
Questions
Mathematics, 27.01.2021 20:40
Mathematics, 27.01.2021 20:40
Mathematics, 27.01.2021 20:40
Mathematics, 27.01.2021 20:40
Chemistry, 27.01.2021 20:40
Physics, 27.01.2021 20:40
Computers and Technology, 27.01.2021 20:40
Health, 27.01.2021 20:40
Mathematics, 27.01.2021 20:40
