subject
Engineering, 21.02.2020 04:33 dkline89

A flow is described by velocity field~V=axˆi+bˆj, wherea= 1/5 s−1andb= 1 m/s. Coordinates are measure in meters. Obtain the equation for the streamline passing throughpoint (1,1). Att= 5 s, what are the coordinates of the particle that initially (att= 0)passed through the point (1,1)? What are its coordinates att= 10 s? Plot the streamlineand the initial, 5 s, and 10 s positions of the particle. What conclusions can you draw aboutthe pathline, streamline, and streakline for this flow?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
A flow is described by velocity field~V=axˆi+bˆj, wherea= 1/5 s−1andb= 1 m/s. Coordinates are measur...
Questions
question
Mathematics, 26.07.2019 01:00
Questions on the website: 13722361