Engineering, 21.02.2020 19:57 odalysgise

An Otto cycle engine is analyzed using the cold air standard method. Given the conditions at state 1, compression ratio (r), and pressure ratio (rp). The specific heats for air are Cp = 1.0045 kJ/kg-K and Cv = 0.7175 kJ/kg-K.

T1 = 300K

P1 = 100 kPa

r = 10

rp = 1.65

a) Determine the temperature (K) at state 2.

b) Determine the pressure (kPa) at state 2.

c) Determine the pressure (kPa) at state 3.

d) Determine the temperature (K) at state 3.

e) Determine the temperature (K) at state 4.

f) Determine the pressure (kPa) at state 4.

g) Determine the net work output (kJ/kg/cycle) for the engine.

h) Determine the heat addition (kJ/kg/cycle) for the engine.

i) Determine the efficiency (%) of the engine.

Points will be given to answer showing all the work done to get right answer.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

An Otto cycle engine is analyzed using the cold air standard method. Given the conditions at state 1...

Questions