Engineering, 21.02.2020 22:04 genyjoannerubiera

The water in a 25-m-deep reservoir is kept inside by a 140-m-wide wall whose cross section is an equilateral triangle as shown in the figure Water 25 m 60° 60° Determine the total force (hydrostatic+ atmospheric) acting on the inner surface of the wall and its line of action. Take the value of g as 9.81 m/s2, the atmospheric pressure as 100,000 N/m2, and the density of water to be 1000 kg/m3 throughout. x 108 N The total force (hydrostatic + atmospheric) acting on the inner surface of the wall is The distance of the pressure center from the free surface of water along the wall surface is m.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

The water in a 25-m-deep reservoir is kept inside by a 140-m-wide wall whose cross section is an equ...

Questions