Engineering, 24.02.2020 19:28 alliemeade1
Who are automated decision systems (ADS) primarily designed for? a. Mid-level managers making tactical decision b. Operational managers who make shop floor decisions c. Strategic level managers making long-term, wide-ranging decisions d. Frontline workers who must make decisions rapidly
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24Ā°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
Who are automated decision systems (ADS) primarily designed for? a. Mid-level managers making tactic...
Questions
Mathematics, 19.07.2020 01:01
Mathematics, 19.07.2020 01:01
Mathematics, 19.07.2020 01:01
Mathematics, 19.07.2020 01:01
Mathematics, 19.07.2020 01:01
English, 19.07.2020 01:01
