Engineering, 24.02.2020 23:12 kryoung08
In casting experiments performed using a certain alloy and type of sand mold, it took 250 sec for a cube shaped casting to solidify. The cube was 50 mm on a side. Determine the value of the mold constant in Chvorinov's rule.
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
In casting experiments performed using a certain alloy and type of sand mold, it took 250 sec for a...
English, 18.04.2020 00:39
History, 18.04.2020 00:39
Mathematics, 18.04.2020 00:39
English, 18.04.2020 00:39
Mathematics, 18.04.2020 00:39
History, 18.04.2020 00:39
Spanish, 18.04.2020 00:39
Mathematics, 18.04.2020 00:39