Engineering, 24.02.2020 23:23 rygei2697
A copper-constantan thermocouple is to be used to measure temperatures between 0 and 200°C. The e. m.f. at 0°C is 0 mV, at 100°C it is 4.277 mV and at 200°C it is 9.286 mV. What will be the non-linearity error at 100°C as a percentage of the full range output if a linear relationship is assumed between e. m.f. and temperature over the full range?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
A copper-constantan thermocouple is to be used to measure temperatures between 0 and 200°C. The e. m...
Questions
History, 25.11.2021 14:00
History, 25.11.2021 14:00
Mathematics, 25.11.2021 14:00
Spanish, 25.11.2021 14:00
Chemistry, 25.11.2021 14:00
