Engineering, 25.02.2020 00:43 ninaaforever
A part at Belleh Fontem Manufacturing requires holes of the size 0.50plus or minus0.01 inches. The drill bit has a stated size of 0.50plus or minus0.005 inches and wears at the rate of 0.00017 inches per hole drilled. Give the most and least number of holes that can be drilled with one drill bit before it has to be replaced.
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
Engineering, 04.07.2019 19:20
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
A part at Belleh Fontem Manufacturing requires holes of the size 0.50plus or minus0.01 inches. The d...
Mathematics, 24.06.2021 14:00
History, 24.06.2021 14:00
Mathematics, 24.06.2021 14:00
Social Studies, 24.06.2021 14:00
Computers and Technology, 24.06.2021 14:00
Computers and Technology, 24.06.2021 14:00
Biology, 24.06.2021 14:00
Mathematics, 24.06.2021 14:00
Mathematics, 24.06.2021 14:00
Computers and Technology, 24.06.2021 14:00
Chemistry, 24.06.2021 14:00
English, 24.06.2021 14:00
Computers and Technology, 24.06.2021 14:00