Engineering, 25.02.2020 00:58 aashna66

" An existing equal-tangent sag vertical curve is designed for 60 mi/h. The initial grade is –3% and the elevation of the PVT is 754 ft. The PVC of the curve is at station 134 + 16 and the PVI is at 137 + 32. An overpass is being constructed directly above the PVI. The highway is for cars only (AASHTO minimum and recommended structure clearances do not apply) and the overpass design assumes the driver’s eye height is set conservatively to 5 ft. What is the lowest possible elevation of the bottom of the overpass structure to ensure sufficient stopping sight distance at 60 mi/h?"

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

Answer

You know the right answer?

" An existing equal-tangent sag vertical curve is designed for 60 mi/h. The initial grade is –3% and...

Questions