subject
Engineering, 25.02.2020 04:25 Aaron4thw

Magnesium sulfate has a number of uses, some of which are related to the ability of the anhydrate form to remove water from air and others based on the high solubility of the heptahydrate (MgSO4·7H2O) form, also known as Epsom salt. The densities of the anhydrate and heptahydrate crystalline forms are 2.66 and 1.68 g/mL, respectively. Suppose you wish to form a 20.0 wt% MgSO4 aqueous solution by simply pouring crystals of one of the forms into a tank of water while the temperature is held constant at 30°C. The specific gravity of the 20.0 wt% solution at 30°C is 1.22. Answer the following questions for both forms of the MgSO4 crystals: What volume of water should be in the tank before crystals are added if the final product is to be 1000 kg of the 20 wt% solution? Suppose the tank diameter is 0.30 m. What is the height of liquid in the tank before the crystals are added? What is the height of the water in the tank after addition of the crystals but before they begin to dissolve? What is the height of liquid in the tank after all the MgSO4 has dissolved?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
question
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Magnesium sulfate has a number of uses, some of which are related to the ability of the anhydrate fo...
Questions
question
Mathematics, 16.04.2020 20:27
question
Arts, 16.04.2020 20:27
Questions on the website: 13722362