Consider the following 10 "design rules" for electromechanical products.
Do these seem like r...
Engineering, 25.02.2020 18:03 yonna74
Consider the following 10 "design rules" for electromechanical products.
Do these seem like reasonable guidelines? Under what circumstances could one rule conflict with another one? How should such a trade-off be settled?
1. Minimize parts count
2. Use modular assembly
3. Stack assemblies
4. Eliminate adjustments
5. Eliminate cables
6. Use self-fastening parts
7. Use self-locating parts
8. Eliminate reorientation
9. Facilitate parts handling
10. Specify standard parts
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Questions
History, 19.12.2019 20:31
Mathematics, 19.12.2019 20:31
Mathematics, 19.12.2019 20:31
Mathematics, 19.12.2019 20:31
History, 19.12.2019 20:31
Biology, 19.12.2019 20:31
Mathematics, 19.12.2019 20:31
