The deflection (elastic) curve of a uniform beam subject to a linearly increasing distributed load is

y=(W0/120EIL)(-x^5 + 2L^2x^3 - L^4x)

Use Newton-Raphson and the secant methods to determine the maximum deflection. Use the following parameter values: L = 600 cm; E = 50,000 kN/cm2 ; I = 30,000 cm4 ; and w0 = 2.5 kN/cm.

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10