Engineering, 25.02.2020 22:19 ddmoorehouseov75lc

This question has four pieces of information that are needed to answer all questions in this quiz. (Take your time! Read the questions carefully!) Here is the situation: a PV module has been constructed by connecting 36 solar cells in series! Each cell in this module has the following four (4) characteristics: 1) Open Circuit Voltage = 0.60 V; 2) Short Circuit Current = 5.4 A; 3) Peak Power Voltage = 0.50 V; 4) Peak Power Current = 5.0 A. Now, here is question 1: Calculate the Open Circuit Voltage for the module.

A. 21.6 V
B 3.24 V
C 27.0 V
D 18.0 V
E 0.15 V
F 180.0 V

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

This question has four pieces of information that are needed to answer all questions in this quiz. (...

Questions