Engineering, 25.02.2020 23:57 NerdyJason
A piston–cylinder assembly contains ammonia, initially at a temperature of 220°C and a quality of 50%. The ammonia is slowly heated to a final state where the pressure is 6 bar and the temperature is 180°C. While the ammonia is heated, its pressure varies linearly with specific volume. Show the process of the ammonia on a sketch of the p–y diagram. For the ammonia, determine the work and heat transfer, each in kJ/kg
Answers: 3
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
A piston–cylinder assembly contains ammonia, initially at a temperature of 220°C and a quality of 50...
Mathematics, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01
Social Studies, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01
English, 10.10.2020 23:01
History, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01
Mathematics, 10.10.2020 23:01