Engineering, 26.02.2020 02:03 psa180
A four-cylinder four-stroke engine is modeled using the air standard Otto cycle (two engine revolutions per cycle). Given the conditions at state 1, total volume (V1) of each cylinder, compression ratio (r), rate of heat addition (Q), and engine speed in RPM, determine the efficiency and other values listed below. The gas constant for air is R=0.287 kJ/kg-K.
T1 = 300 K
P1 = 100 kPa
V1 = 500 cm^3
r = 10
Q = 60 kW
Speed = 5600 RPM
Please explain how to get the answers below.
a) Determine the total mass (kg) of air in the engine.
answer = 0.0023229
b) Determine the specific internal energy (kJ/kg) at state 1.
answer = 214.07
c) Determine the specific volume (m^3/kg) at state 1.
answer = 0.86100
d) Determine the relative specific volume at state 1.
answer = 621.2
e) Determine the relative specific volume at state 2.
answer = 62.120
f) Determine the temperature (K) at state 2.
answer = 730.04
g) Determine the pressure (kPa) at state 2.
answer = 2433.5
h) Determine the specific internal energy (kJ/kg) at state 2.
answer = 536.10
i) Determine the cleearance volume (cm^3) for a single cylinder.
answer = 50
j) Determine the specific internal energy (kJ/kg) at state 3.
answer = 1089.6
k) Determine the temperature (K) at state 3.
answer = 1373.77
l) Determine the pressure (kPa) at state 3.
answer = 4579.2
m) Determine the relative specific volume at state 3.
answer = 9.4750
n) Determine the relative specific volume at state 4.
answer = 94.750
o) Determine the temperature (K) at state 4.
answer = 625.32
p) Determine the pressure (kPa) at state 4.
answer = 208.44
q) Determine the specific internal energy (kJ/kg) at state 4.
answer = 454.18
r) Determine the net power output (kW).
answer = 33.9717
s) Determine the efficiency (%) of the engine.
answer = 56.620
Answers: 2
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
A four-cylinder four-stroke engine is modeled using the air standard Otto cycle (two engine revoluti...
Mathematics, 28.06.2020 05:01
Business, 28.06.2020 05:01
History, 28.06.2020 05:01
Health, 28.06.2020 05:01
Mathematics, 28.06.2020 05:01
Mathematics, 28.06.2020 05:01