Engineering, 26.02.2020 03:11 brendonvernon8
An air-standard dual cycle has a compression ratio of 18:1 and a cutoff ratio of 1.1.Assume that the isentropic compression efficiency is 85% while the isentropic expansionefficiency is 90%. The pressure ratio during the constant volume heat addition process is1.1. At the beginning of the compression stroke, P1
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
An air-standard dual cycle has a compression ratio of 18:1 and a cutoff ratio of 1.1.Assume that the...
Advanced Placement (AP), 03.08.2019 10:30
Health, 03.08.2019 10:30
English, 03.08.2019 10:30
Chemistry, 03.08.2019 10:30
Arts, 03.08.2019 10:30
History, 03.08.2019 10:30
Physics, 03.08.2019 10:30
English, 03.08.2019 10:30
English, 03.08.2019 10:30
English, 03.08.2019 10:30
Social Studies, 03.08.2019 10:30
Chemistry, 03.08.2019 10:30