A horizontal curve is being designed through mountainous terrain for a four-lane road with lanes that are 10 ft wide. The central angle (I) is known to be 40 degrees, the tangent is 520 ft, and the stationing of the tangent intersection (PI) is 2600 + 00. Under specified conditions and vehicle speed, the roadway surface is determined to have a coefficient of side friction of 0.08, and the curve’s superelevation is 0.09 ft/ft. What is the stationing of the PC and PT and what is the safe vehicle speed?

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false