Engineering, 28.02.2020 19:26 tatia65

The Keystone Pipeline has an inside diameter of 36 inches andcarries a flow rate of 590,000 barrels of crude oil per day at 40°C. If the pipe is new, non-corroded steel, estimate the pumphorsepower required per mile of pipe. Use rho=1.67 slug/ft3 andμ=1.11x10-4 slug/ft*sec for the oil. This pipeline is in a coldenvironment, does it make sense that the oil is so warm?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

You know the right answer?

The Keystone Pipeline has an inside diameter of 36 inches andcarries a flow rate of 590,000 barrels...

Questions