Engineering, 02.03.2020 05:24 idontknow1993
In a standard multi-view drawing arrangement, the rear view is drawn to the
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
In a standard multi-view drawing arrangement, the rear view is drawn to the...
Arts, 31.10.2020 01:30
Mathematics, 31.10.2020 01:30
English, 31.10.2020 01:30
Computers and Technology, 31.10.2020 01:30
Mathematics, 31.10.2020 01:30
English, 31.10.2020 01:30
English, 31.10.2020 01:30
Mathematics, 31.10.2020 01:30
Biology, 31.10.2020 01:30
Mathematics, 31.10.2020 01:30
English, 31.10.2020 01:30
English, 31.10.2020 01:30