subject
Engineering, 02.03.2020 20:27 dondre54

Consider an airfoil in a freestream with a velocity of 66 m/s at standard sea-level conditions. At a point on the airfoil, the minimum pressure is measured as 1.0 x 105 N/m2 . What is the pressure coefficient at this point

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
question
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21Β°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32Β°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
Consider an airfoil in a freestream with a velocity of 66 m/s at standard sea-level conditions. At a...
Questions
question
Mathematics, 23.10.2019 01:00
question
Mathematics, 23.10.2019 01:00
question
Mathematics, 23.10.2019 01:00
question
Mathematics, 23.10.2019 01:00
question
Social Studies, 23.10.2019 01:00
Questions on the website: 13722362