Engineering, 02.03.2020 20:08 gracieorman4

The length of industrial filters is a quality characteristic of interest. Thirty samples each of size 5, are chosen from the process. The data yield an average length of 110 mm, with the process standard deviation estimated to be 4mm.

(a) Find the warning limits for a control chart for the average length.

A.(115.58, 102.42) B.(114.58, 103.42) C.(113.58, 106.42) D. (112.58, 105.42)

(b) Find the 3 control limits. What is the probability of a type I error?

A.(114.37, 105.63) B.(115.37, 104.63) C. (116.37, 103.63)

(c) If the process mean shifts to 112 mm, what are the chances of detecting this shift by the third sample drawn after the shift?

A.6.76 % B.7.76 % C.8.76 % D.9.76 %

(d) What is the chance of detecting the shift for the first time on the second sample point drawn after the shift?

A.1.9%B.2.9 % C.3.9 % D. 4.9 %

(e) What is the ARL for a shift in the process mean to 112 mm?

A.31 B.32 C.33 D.34

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

You know the right answer?

The length of industrial filters is a quality characteristic of interest. Thirty samples each of siz...

Questions