Engineering, 03.03.2020 00:33 shinyelish6

A 4MGD groundwater treatment plant receives its source water at temperature and pH of 20oC and 6.5 respectively, a 82mg/L CO2 concentration and a 6.2mg/L Fe2+concentration. An induced draft aerator with 90% efficiency for CO2removal and the capability to achieve equilibrium concentration of dissolved oxygen in water will be used as the initial unit process in the treatment plant.

a. Using Henry's Law, determine the equilibrium concentration of oxygen in mg/L Henry's constant at 20°C is 41,619 atm, and the partial pressure of oxygen is 0.21 atm.
b. Considering equilibrium concentration of dissolved oxygen from (a), will the aerator provide adequate oxygen to oxidize Fe2+ to meet EPA's secondary MCL?
c. For a 20 minute contact time criteria for iron removal, will alkaline chemical addition to adjust pH be necessary?
d. esign a contact tank to achieve optimum Fe2+ oxidation, along with a baffle wall. Show all calculations and clearly provide all assumptions you make for the design criteria.
e. Present your contact tank design through a schematic diagram showing the longitudinal section of the tank with dimensions. Also, present a preliminary layout of the baffle wall with estimated number of orifices. The design drawing does not have to be to scale.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

You know the right answer?

A 4MGD groundwater treatment plant receives its source water at temperature and pH of 20oC and 6.5 r...

Questions