The temperature readings from a thermocouple in a furnace fluctuate according to a cumulative distribution function F(x) = {0 x < 800 degree C 0.1x - 80 800 degree C lessthanorequalto x < 810 degree C 1 x > 810 degree C Determine the following. (a) P(X < 805) (b) P(800 < X lessthanorequalto 805) (c) P(X > 808) (d) If the specifications for the process require that the furnace temperature be between 802 and 808 degree C, what is the probability that the furnace will operate outside of the specifications?

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10