An insulated piston-cylinder device initially contains 0.16 m2 of CO2 at 150 kPa and 41 °C. Electric resistance heater supplied heat for 10 mins. During this procedure the volume has doubled while pressure stayed the same. Considering electric resistance heater running on 110 V, calculate the needed current in A ((Give your answer with three decimals, and do NOT enter units!!!).

What precautions should you take to prevent injuries when dealing with heavy loads?

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m