Engineering, 03.03.2020 03:58 ecolifesfsu4949

A four-cylinder automobile engine is to be supported on three shock mounts, as indicated. The engine-block assembly weighs 225 kg. If the unbalanced force generated by the engine is given by 900 sin 100tN, design the three shock-mounts (each of stiffness k and viscous-damping constant C. Such that the amplitude of vibration is less than 0.25 cm

Answers: 1

Show answers

Another question on Engineering

Engineering, 06.07.2019 02:30

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

Answer

Engineering, 06.07.2019 05:20

An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg.k. find the power input to the compressor (in kw)

Answers: 3

Answer

Engineering, 11.07.2019 01:10

Acomposite spherical tank made of three different materials in series with inside and outside convection. a)-draw the schematic of the system. b)-draw the thermal circuit for this system with all details. c)-formulate an expression for the heat transfer rate. d)-formulate an expression for the overall heat transfer coefficient based on ai. e)-formulate an expression for overall heat transfer coefficient based on a4 (outer area).

Answers: 3

Answer

Engineering, 11.07.2019 01:10

Which one of the following is not a planar defect? a)- twin boundary b)- interstitials c)- stacking fault d)- twist boundary

Answers: 1

Answer

You know the right answer?

A four-cylinder automobile engine is to be supported on three shock mounts, as indicated. The engine...

Questions