Engineering, 03.03.2020 18:25 lyn94
A turbojet engine has a converging nozzle with variable area. At one sea level operating condition, the engine exhaust flow is 100 kg/s and the stagnation state entering the nozzle is 1100K and 3 atm. The specific heat ratio may be assumed constant at 1.33. If the nozzle is isentropic, find the required exit area. If instead the nozzle efficiency is 90%, find the exit stagnation pressure and the percentage increase in required exit area.
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
A turbojet engine has a converging nozzle with variable area. At one sea level operating condition,...
Mathematics, 05.11.2020 23:00
English, 05.11.2020 23:00
Mathematics, 05.11.2020 23:00
History, 05.11.2020 23:00
Mathematics, 05.11.2020 23:00
History, 05.11.2020 23:00