"3.51 A horizontal curve on a single-lane freeway ramp is 400 ft long, and the design speed of the ramp is 45 mi/h. If the superelevation is 10% and the station of the PC is 18 + 25, what is the station of the PI and how much distance must be cleared from the center of the lane to provide adequate stopping sight distance?"

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.