Engineering, 05.03.2020 22:48 rouseallie9428
A milling operation was used to remove a portion of a solid bar of square cross section. Forces of magnitude P = 19 kN are applied at the centers of the ends of the bar. Knowing that a = 28 mm and sigma_all = 130 MPa, determine the smallest allowable depth d of the milled portion of the bar.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
You know the right answer?
A milling operation was used to remove a portion of a solid bar of square cross section. Forces of m...
Questions
English, 16.10.2020 08:01
English, 16.10.2020 08:01
Social Studies, 16.10.2020 08:01
English, 16.10.2020 08:01
History, 16.10.2020 08:01
History, 16.10.2020 08:01
Biology, 16.10.2020 08:01
Business, 16.10.2020 08:01
Geography, 16.10.2020 08:01
Mathematics, 16.10.2020 08:01
Social Studies, 16.10.2020 08:01
