Engineering, 05.03.2020 23:41 Elliewop

A crest vertical curve connects a +4.90 percent grade and a -1.85 percent grade. The PVI is at station 77+00.00 at an elevation of 770.00 ft. The design speed is 60 mi/h. Determine: a. The length of the vertical curve using the AASHTO method ("K" factors) b. The station of the BVC c. The elevation of the BVC d. The station of the EVC e. The elevation of the EVC f. The station of the high point g. The elevation of the high point h. The elevation of station 75+30.00 Also, provide a tabulation showing the elevations at each full station on the curve, including the distance from the PVC for each full station, the elevation on initial tangent, the offset, and the elevation on the vertical curve.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

You know the right answer?

A crest vertical curve connects a +4.90 percent grade and a -1.85 percent grade. The PVI is at stati...

Questions