Engineering, 07.03.2020 00:30 KayBJ2005
Choose the COST tab and check that 1 day is selected. Set the Cost of electricity to 10.0 ¢/kWh. The daily cost is equal to the daily consumption (in kilowatt-hours) multiplied by the cost per kilowatt hour (¢/kWh). What is the daily cost of an incandescent lamp?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Choose the COST tab and check that 1 day is selected. Set the Cost of electricity to 10.0 ¢/kWh. The...
Questions
English, 10.09.2020 02:01
Spanish, 10.09.2020 02:01
History, 10.09.2020 02:01
Business, 10.09.2020 02:01
History, 10.09.2020 02:01
Health, 10.09.2020 02:01
