Engineering, 07.03.2020 01:02 snowww5492
A conveyor will run when any one of four inputs are on. It will stop when any one of four other inputs are on. Develop a PLC program that will simulation this operation. Enter the simulation program into the PLC and prove its operation pdf
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
A conveyor will run when any one of four inputs are on. It will stop when any one of four other inpu...
Mathematics, 13.07.2019 14:00
Mathematics, 13.07.2019 14:00
Computers and Technology, 13.07.2019 14:00
History, 13.07.2019 14:00
English, 13.07.2019 14:00
Chemistry, 13.07.2019 14:00
History, 13.07.2019 14:00
History, 13.07.2019 14:00
History, 13.07.2019 14:00
Mathematics, 13.07.2019 14:00