Engineering, 07.03.2020 04:16 moodyshaliyah01
CONVEYOR PROGRAM: A conveyor will run when any one of four inputs are on. It will stop when any one of four other inputs are on. Develop a PLC program that will simulate this operation. Enter the simulated program into the PLC and prove its operation
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
CONVEYOR PROGRAM: A conveyor will run when any one of four inputs are on. It will stop when any one...
Questions
Mathematics, 01.11.2021 21:30
English, 01.11.2021 21:30
Geography, 01.11.2021 21:30
Business, 01.11.2021 21:40
Social Studies, 01.11.2021 21:40
Mathematics, 01.11.2021 21:50
Mathematics, 01.11.2021 21:50
Health, 01.11.2021 21:50
