Engineering, 07.03.2020 06:03 ryleepretty

Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that is at [infinity] = 1100°C and maintains a convection coefficient of 250 W/m2·K over the blade. The blades, which are fabricated from Inconel, 20 W/m·K, have a length of 50 mm. The blade profile has a uniform cross-sectional area of 6 × 10-4 m2 and a perimeter of 110 mm. A proposed blade-cooling scheme, which involves routing air through the supporting disc, is able to maintain the base of each blade at a temperature of 300°C.

a. If the maximum allowable blade temperature is 1050 deg. C and the blade tip may be assumed to be adiabatic, is the proposed cooling scheme satisfactory?
b. For the proposed heating scheme, what is the rate at which heat is transferred from each blade to the coolant?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

You know the right answer?

Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that i...

Questions