Engineering, 10.03.2020 02:13 allisonxyooj22
Given a matrix, clockwise-rotate elements in it. Please add code to problem3.cpp and the makefile. Use the code in p3 to test your code. Submit your code and a cpp. sh url, like in your projects and previous assignments. For the cpp. sh url, put your solution into one large program.
Input
1 2 4
5 7 8
3 6 9
Output:
4 1 2
7 5 3
8 9 6
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Given a matrix, clockwise-rotate elements in it. Please add code to problem3.cpp and the makefile. U...
Biology, 19.02.2020 06:07
Mathematics, 19.02.2020 06:07
Mathematics, 19.02.2020 06:08
Computers and Technology, 19.02.2020 06:08
Biology, 19.02.2020 06:08
English, 19.02.2020 06:09
Physics, 19.02.2020 06:09
English, 19.02.2020 06:09