Engineering, 10.03.2020 03:03 JusSomeRandomGuy
JavaWrite a method called collapseSpaces that accepts a Scanner representing an input file and a PrintStream representing an output file as its parameters, then reads that file and outputs it with all its tokens separated by single spaces, collapsing any sequences of multiple spaces into single spaces. For example, consider the following text: many spaces on this line!If this text were a line in the file, the same line should be output as follows:many spaces on this line!You will want to place the method in a class to test it. Call the class CollapseSpacesHints:Your input and output files should be different files (filenames) to avoid overwriting filesYour method should work with input files that have multiple lines. Use a line-based approach. Keep the line breaks the same.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate Γ t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
JavaWrite a method called collapseSpaces that accepts a Scanner representing an input file and a Pri...
Chemistry, 27.10.2019 07:43
Mathematics, 27.10.2019 07:43
Mathematics, 27.10.2019 07:43
History, 27.10.2019 07:43
Geography, 27.10.2019 07:43
English, 27.10.2019 07:43
History, 27.10.2019 07:43