Engineering, 11.03.2020 00:58 hjamileth77

Determine the effluent concentrations of S, Xa, Xi, Xv, and X (the total suspended solids) for a 10 m³ reactor operated as a chemostat that is fed 3 m³/d of wastewater containing BOD_L of 2,000 mg/l, 20 mg/l of nonbiodegradable suspended organic solids, and 15 mg/l of inorganic suspended solids.
Assume aerobic conditions exist and that Y= 0.65 mg cells/mg BOD_L, q^ = 16 mg BOD_L/d per mg cells, K = 25 mg/l, b = 0.2/d, and f_d = 0.8.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

Determine the effluent concentrations of S, Xa, Xi, Xv, and X (the total suspended solids) for a 10...

Questions